Welding is a very important part of construction and development process in the world. The importance of welding can be described in some sentences. Welding is part of each and every building, factory, public construction like bridges, vehicles, machines etc. So, the types of different ways of welding is also very important.
Three types of welding are commonly very popular and useful. They are Metal Inert Gas (MIG), Tungsten Inert Gas (TIG) and Flux Cored Welding (This resource will be helpful for you if you need to know more about the flux core welding: https://www.welderscave.com/best-flux-core-welders/ ) .
In this post I want to give you why are these welding useful for and how they work.
Metal Inert Gas in short MIG welding is the most practiced welding procedure in the world. It is one of the easiest ways for welding and fabrication work in metals. For its easy and fast working procedure, it is widely accepted by the welder especially by the novice welders.
In this type of welding, the welder uses an arc along with a shielded wire feed to create a weld with a base by using at least two metals at a time. This makes a strong weld that is preferred by many people. It is a relatively cheap alternative than other types of welding.
- Very easy and fast process
- Very good for construction and fabrication
- Very much user friendly for the beginners
Tungsten inert Gas in short (TIG) welding is another popular and useful form of welding. In this process, the welder uses an electric arc to fuse metals together through a nonstop wire feed. It is different from MIG because it uses a little bit longer tungsten along with a dorky feed into the weld puddle.
The tungsten electrode works by using the inert gas and passing the electric current to make the weld. TIG welding is expensive in comparison with other types of welding. Experienced welders work with TIG welding as it is not suitable for the beginner and inexperienced. But it makes strong and smooth welding.
- Very common for thinner metals
- Can create very strong and smooth joint
Flux Cored Arc welding
Flux Cored Arc welding in short (FCAW) is another popular welding method. It is done in a gasless operation but used with MIG welders. The working process of flux-cored is different from other types of welding. In this process it involves using an arc to produce heat within two pieces of metal and later joined by the heated electrode with the help of nonstop feed. This tubular weld process posse a flux element inside of the shield that ensured the strength.
- When welding thick and heavy material it creates deeper penetration
- It is appropriate also for dusty and dirty materials
- Can work with or without gas
- Also perfect in rough condition like very windy environment
All these welding method has their distinctive sector and style of working. But all the three process are important for constructions in-home and outdoor. One may work for thinner metal others work for thicker. So, you can’t avoid any one of them.